D3 Front Spoiler and Competition Front Splitter (Carbon Fiber) w/Aluminium Stabilizer Struts (can use w/1.101.110)
Cadillac CTS-V 2009 - 2015
Splitter - Spoiler options
D3 1.101.110
spoiler
Elegance & the Motorsport Spirit are the key factors in the design
philosophy of D3.

The D3 Front Spoiler for CTS-V is a 2pc front spoiler that adds on to the
OEM front bumper. The D3 Front Spoiler does not require drilling and will
be installed on to OEM mounting positions giving the CTS-V a more
aggressive yet sporty look.

The D3 Racing Front Splitter has been designed to fit the OEM CTS-V front
bumper with or without the D3 Spoiler. In high speed competition
environments it is important to maintain control of the vehicle,
aerodynamics play a large role in this task. The D3 Racing Front Splitter is
engineered to “split” the fast moving air below the vehicle from the slower
moving air that is moving above.

Note: Comes unfinished, painting required.
$338.88
D3 Air Inlet Covers w/LED Lighting (pair)
Cadillac CTS-V 2009 - 2015
D3 1.101.112
The D3 Air Inlet Covers are designed to replace the OEM fog light cover
with wide open bezels that allow for the maximum amount of air to enter
the openings. This is ideal for drivers that are running ram-air, oil and/or
trans coolers on their CTS-V automobiles.

Note: Bumper cutting required. Parts come primered, prepping and finish
painting required before installation. Parts may not be in stock and be
made to order.
$384.88
D3 Hood V1 - Vented Motorsport (optional carbon fiber)
Cadillac CTS-V 2009 - 2015
Material
Elegance & the Motorsport Spirit are the key factors in the design
philosophy of D3.

The D3 Ventilated Motorsport Hood replaces the OEM CTS-V hood with a
ligher (nearly 8 lbs) carbon fiber hood. The Ventilated Hood is designed to
extract heat allowing for cooler underhood temperatures. Additionally the
hood is also designed to clear the largest blowers available including the
4.2L ULTRACHARGER kit. Hood fits with OEM mounting points and does
not require any body modification to fit.

Note: Only available in Full Carbon Fiber. Non UPS item, truck freight
only.
D3 Air Inlet Racing Hood
Cadillac CTS-V 2009 - 2015
Hood option
D3 1.101.171
The D3 Air Inlet hood is used on pinnacle D3 builds such as the ULTRA-V
and D3 Dragster because it allows the highest amount of fresh air to cycle
into the engine compartment.
The D3 Air Inlet Hood has been designed to allow for fresh air to enter the
engine compartment thus lowering the under hood air ambient
temperature. It also features a raised design allowing for the clearance of
the D3 ULTRACHARGER kits.

Made in USA

100% Fiberglass construction for lightweight durability.

Optional Carbon Fiber Overlay (+$500)
$2445.88
D3 Side Skirts (pair)
Cadillac CTS-V 2009 - 2015
D3 1.101.121
Elegance & the Motorsport Spirit are the key factors in the design
philosophy of D3.

The D3 Side Skirts are replacement side skirts that outright replace the
OEM skirts. The vented side skirt follows the Cadillac CTS-V design lines by
accentuating the natural lines of the car.

Note: Comes Raw. Paint required before installation.
$874.88
$1575.88
D3 1.101.170 FG
D3 1.101.111
splitter
$675.88
D3 Side Skirt Air Foil Add-On
Cadillac CTS-V 2009 - 2015
Material
D3 1.101.122
The D3 CTS-V Coupe Air Foils are designed to sit below either the D3 or
OEM Side Skirt. The Air Foil aids in keeping pockets of air below the vehicle
in high speed competition environments.

The D3 Air Foils fit all V Models, as well as 2011+ CTS V6 Models that come
equipped with “V” Side Skirts. Parts may not be in stock and be made to
order.

Note: Paint required before installation.
$374.88
D3 Rear Diffuser
Cadillac CTS-V 2009 - 2015
Vehicle Model & Material
D3 1.101.171CF
with carbon fiber overlay
$2945.88
D3 1.101.122CF
carbon fiber
$1454.88
D3 Rear Bladewing and Wing
Cadillac CTS-V 2009 - 2015 Coupe only
Wing Style
The D3 Bladewing for CTS-V Coupe is a rear wing that fits to the top of the
3rd brake light. The Bladewing gives the V-Coupe a more aggressive race-
inspired look.

The D3 Rear Wing for CTS-V Coupe is a rear wing that fits atop the 3rd
brake light and extends across the entire rear hatch.

In the past drivers that wanted a true “End-to-end” rear wing would have
to swap their 3rd brake light with the shorter CTS 6cyl 3rd brake light.

The creation of the D3 Rear Wing eliminated this-The D3 Rear Wing for
CTS-V Coupe is the only wing available that will sit directly on top of the
CTS-V Coupe 3rd Brake Light.

Recommended installation is completed via 3M body tape or Black
Urethane Adhesive.
Note: Comes unfinished, painting required.
D3 Rear Wing for 2014- CTS Sedan
Cadillac CTS-V 2014-2015
Elegance & the Motorsport Spirit are the key factors in the design philosophy of D3.

The D3 Diffuser is a 2pc diffuser that is designed to aid in the transition between fast
moving air underneath the car and the slower stream of air from from the coupe
resulting in less drag and turbulence in high speed enviroments.

Note: Recomend aftermarket exhaust, triming required for factory exhaust, comes
raw, paint and fit/finish required prior to installation. Parts may not be in stock
and be made to order.
D3 1.101.136
coupe
$575.88
D3 1.101.136CF
coupe - carbon fiber
$2095.88
D3 1.101.135
sedan
$575.88
D3 1.101.135CF
sedan - carbon fiber
$2095.88
coupe
sedan
D3 1.101.145
Bladewing
$384.88
D3 1.101.146
Rear Wing
$384.88
D3.1.110.145
sedan
$384.88
D3 CTS-V Widebody Conversion
Cadillac CTS-V 2008-2015 Coupe/Sedan/Wagon
*For installation at the D3 Workshop Only!
D3 WIDEBODYCONV-CTSV
Elegance & the Motorsport Spirit are the key factors in the design
philosophy.

D3 Widebody packages are not add-on flares, they are the real deal. The D3
Widebody fuses motorsport function with clean classy lines that allow for
the Cadillac design to be accentuated throughout the body.

D3 Widebody conversions are not just for aesthetics, they allow for the
maximum wheel + tire size to be fitted to their intended application. These
“Wide-Track” cars not only have improved race functional styling but also
allow the vehicle to handle better by allowing for the wheels to be pushed
out to the furthest possible corners of the vehicles.
WBR Import/Export
(The One Stop Auto Shop)
WBR Import/Export
(The One Stop Auto Shop)
WBR Import/Export
(The One Stop Auto Shop)
FREE SHIPPING
on ALL D3 (except oversized)
D3 Tuning
WBR Import/Export
(The One Stop EXPORE Shop)
FREE SHIPPING
on most orders over $99
WBR Import/Export
(The One Stop Auto Shop)
FREE SHIPPING
on most  orders over $99
WBR Import/Export
(The One Stop Auto Shop)
Solution Graphics
WBR Import/Export
Scott Marlow (owner)
Sugar Land, Texas  U.S.A
Bus: (832) 886-1677
Fax: (832) 886-1678

scott@scottmarlow.net
1 (866) 761-0974
$9875.88
$2945.88
D3 1.101.170
The D3 Rear Wing sits on top of the 3rd brake light.  No drilling is required
for installation.



Aero Parts come raw and will need to be prepped and painted prior to
installation. Parts may not be in stock and be made to order.



Fits 2015- Cadillac CTS including CTS V-Sport Sedan